App release notes

Release Notes¶

MOCREO Smart App Version v1.5.0¶

Release Date (2026-02-27)¶

New Device Support¶

Added Support for New Models: Officially compatible with NS3 (Dual-Probe Temperature Sensor) and LB1 (Smart Alarm Buzzer).
Setup Optimization (LS1/LS2): Added a "Can't scan?" manual setup entry for LS1 and LS2 devices, providing an alternative Bluetooth & LoRa pairing path if QR code scanning is unavailable.

New Features & Updates¶

Interactive Data Charts: Added new time-range filters (1H / 1D / 1W / 1M / 1Y) and supported dual-finger zoom and drag interactions for more detailed and intuitive data viewing.
NS3 Dual-Probe Management:
Independent Probe Settings: Users can now name, set alert rules, and select scenarios for each probe separately.
New device cards on the Home page for clear, multi-channel data visualization.
LB1 Smart Buzzer Integration:
New device cards for quick status checks.
Dedicated control page supporting parameter configuration, alarm dismissal, and device testing.
Alarm System Enhancement: Upgraded the alarm notification logic to support selecting either a Hub or the new LB1 as the sound-alert device, offering more flexible placement for audible alarms.
Regional Localization: Added a Country/Region selection setting for better localized asset management.
Improved Settings Consistency: Standardized the configuration interface for alert rules, data calibration, and history data across different device models for a more intuitive user experience.

Bug Fixes¶

MS2 Battery Display: Optimized the battery measurement and display logic for MS2 sensors under low-power conditions.
ST8 Alert Rule Sync: Improved the synchronization logic for ST8 alert rules to ensure consistency between the App settings and the server.

MOCREO Smart App Version v1.4.0¶

Release Date (2025-12-28)¶

New Features¶

New Device Models: Added support for LD1, MS2, and H6Lite devices.
Device Diagnostics (v2.0): Enhanced device anomaly diagnosis with weight display and type differentiation. Defined L0/L1/L2 diagnostic workflows to improve troubleshooting processes across different scenarios.
QR Code Setup Flow: Unified setup process with support for manual SN input. Added context-aware navigation based on different scanning scenarios.
LS1/LS2 Compatibility: Implemented compatibility handling for new and legacy LS1/LS2 devices. Setup flow automatically detects device version based on QR code scan result (SN for legacy devices, fingerprint for new devices) and routes to the appropriate setup process. Legacy devices retain firmware upgrade functionality while new devices do not.
LS2 Special Batch Handling: Added Contact Us prompt for specific LS2 batches when probe is not connected.
Dismiss (v2.0): Enhanced dismiss functionality with multi-channel alarm information retrieval to address the issue where users without notification permissions couldn't see dismiss popups. Implemented cross-asset dismiss and multi-device dismiss synchronization.
Rule Settings: Added door sensor rules and adjusted rule arrangement styles.
Shop Module: Introduced comprehensive shopping features including:
Shop homepage with ad carousel, secondary category display, and product listings
Product detail pages with image gallery, product descriptions/specifications, and related product recommendations
Shopping cart with temporary cart ID registration, supporting query/modify/delete operations and checkout redirect to MOCREO Shop
Profile Enhancement: Added promotional carousel banner.
Global Features: Added announcement popup dialog.

Improvements¶

Home Page: Redesigned device cards and replaced message icon with member management icon in the top-right corner. Weather information now refreshes each time the home page is accessed. Disabled guide tour.
Device Management: Improved device setup and management workflows with better compatibility handling and diagnostic capabilities.

MOCREO Smart App Version v1.3.0¶

Release Date (2025-11-28)¶

New Features¶

SMS Notification Support: Added support for receiving alarm notifications via SMS (Initial support for LW1 devices).
Account Management: Added the ability for users to modify their bound email address directly within the App.
Critical Alerts: Added support for Critical Alerts to ensure high-priority notifications are delivered even when the phone is muted or in Do Not Disturb mode.
New UI/UX: Introduced new interactive elements and page designs for a better user experience.

Improvements¶

Hub Beep Settings: Optimized the configuration logic for Hub buzzers and added prompts when selecting offline Hubs.
Setup Guidance: Added a prompt to configure sensor alerts immediately after successfully adding a new Hub.
Data Export: Optimized the time format display (12-hour/24-hour) in exported data files.
SMS Interaction: Improved the validation logic and error prompts for phone number binding and verification codes.

Bug Fixes¶

Account Security: Fixed a security issue where other devices logged into the same account could still modify configurations after the account password was changed on the primary device.
Notification Reliability: Fixed an issue where push notifications might occasionally fail to arrive on iOS devices.
Alert Logic: Fixed an issue where LW1 devices might display duplicate alert data after triggering an alarm.
Dismiss Interaction: Fixed an issue where the "Dismiss" popup would not appear or behave incorrectly in certain scenarios (e.g., when push notifications are disabled).
Data Synchronization: Fixed issues where asset information (Nickname/Email) was not syncing correctly across the App and email notifications after modification.
UI Display: Fixed a display glitch where the border color would change abnormally on the LW1 history page.
Legacy Support: Removed irrelevant "Sounds" settings on the interface for older NS1 hardware versions.
Connection Stability: Fixed an issue where the App required a restart to recover after a socket disconnection.

Version: v1.2.1¶

Release Date: 2025-05-24¶

Fixed known issues to enhance app stability.

Version: v1.2.0¶

Release Date: 2025-05-20¶

New Features
Support for LS3 devices with external probe setup guidance
Drag-and-drop device sorting in "All Rooms" view
First-time user guidance for asset management
Real-time network status monitoring
Enhanced data dashboard with orientation adjustment
Bug fixes

Version: v1.1.1¶

Release Date: 2024-10-31¶

New Features¶

Supports LS2
ST8 supports data calibration

Improvements¶

Optimizes login timeout issue

Bug Fixes¶

Corrects text errors on some pages
Fix known issues.

Version: v1.1.0¶

Release Date: 2024-10-19¶

New Features¶

Pre-sales consultation and quick exchange options
Support for app usage without login
Compatibility with temperature sensor ST8
View relative signal strength of Hub and devices
Expanded member permissions for family invitations
Sync measurement data by proximity to the device

Bug Fixes¶

Fix known issues.

Version: v1.0.8¶

Release Date: 2024-08-28¶

New Features¶

Supports H5-PRO,LS1,MS2,SW2
Allows asset timezone configuration

Improvements¶

Optimizes asset address setting

Bug Fixes¶

Fix known issues.

Version: v1.0.7¶

Release Date: 2024-06-26¶

New Features¶

Endorse a broader array of device categories (ST9, ST10)

Improvements¶

Enhanced user experience.

Bug Fixes¶

Fix known issues.

Version: v1.0.5¶

Release Date: 2024-05¶

Improvements¶

Enhanced user experience.

Bug Fixes¶

Fix known issues.