MOCREO Sensor System Release Notes
Release notes for the MOCREO Sensor App, App Portal, and Sensor System IoT Hub.
App / Portal - 1.5.8
Release date: 2026-06-19
Features
- MS2 Temperature Sensor support - Now supporting the MS2 probe-type temperature sensor. Place the probe in fridges, freezers, liquids, or other hard-to-reach spots for accurate readings; view real-time temperature, charts, and history; set high/low temperature alerts and calibration; and monitor remotely through a Hub.
- Account management in the app - Change your password, change your email address, and sign out, all within the app.
- Email subscriptions for important notices - Subscribe to MOCREO's important email notifications, choose the types you want to receive, and manage them anytime in Settings > Email Subscriptions.
Improvements
- Language changes now apply consistently across the app, including device status and in-app messages.
- Improved sign-out and session expiry handling.
- Various refinements to the existing device setup and settings flows.
App / Portal - 1.5.6
Release date: TBD
Improvements
- Data export: Zigbee and Bluetooth LE sensors now both support exporting up to 2 years of data.
- Added tips on the sensor settings page explaining that battery and signal are not updated in real time. Press the device button to force a report.
- Added a legend for the status icons shown on Home page sensor cards.
- After Hub setup, the Home page now shows where to find the Hub.
- Historical charts now default to the last 24 hours.
- Replaced the "probe disconnected" icon with a clearer one.
- Added a link to the device compatibility document when no device has been added yet.
Bug Fixes
- Fixed an issue where the ST7-CL could not be configured.
- Fixed Ethernet setup on Android where the Hub could not be discovered.
- Fixed chart display issues when switching between portrait and landscape.
IoT Hub - 2.0.8
Release date: 2026-07-06
Bug Fixes
- The Hub now reports its status to the cloud immediately after a network change, so the app shows the correct state without delay.
- Fixed a problem on the Hub Portal language settings page where changes could not be saved correctly.
IoT Hub - 2.0.7
Release date: See 2.0.8 above
Features
- Added support for the MS2 probe-type temperature sensor connected through the Hub, including data reporting and alerts. Requires MOCREO Sensor App 1.5.8 or later.
IoT Hub - 2.0.6
Release date: TBD
Bug Fixes
- Fixed custom "No Upcoming Event" and "Until" texts on the Hub Portal not taking effect after saving.
- Custom preset text is now limited to No Upcoming Event, Until, and Available Now.
- Added a note that when multiple Hubs are in use, each Hub must be configured separately.
Earlier IoT Hub Releases
2.0.2
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known bugs
2.0.1
Sensor System IoT Hub · · h1b, h2
Features
- feature(hub): Added support for remote commands
- feature(hub): Added Setup fails to upload logs to server
- feature(hub): Hub Portal adds the ability to manually turn on remote logging
Bug Fixes
- fix(sensor): Fix known bugs
1.5.4
Sensor System IoT Hub · · h1b, h2
Features
- Feature (Sensor): Added support for MS1, MS2.
- Feature (Sensor): No longer show gray offline state for Sensors without network capability.
- Feature (Setting): Add a new user information screen.
Bug Fixes
- Fix (Sensor): Fix Known Issues
1.5.3
Sensor System IoT Hub · · h1b, h2
Features
- Feature (Sensor): Added climate sensor SS1 with screen.
- Feature (Sensor): ST8 data export function optimization.
- Feature (Sensor): Some BLE Sensor specified versions perform upgrade checks and OTA.
- Feature (Sensor): Time Selection Component Adjustments.
- Feature (Sensor): ST7/ST8 added support for temperature calibration.
- Feature (Sensor): Registration support for name information.
Bug Fixes
- Fix (Sensor): Fix Known Issues
- Fix (Sensor): Hub Setup actively synchronizes information.
- Fix (Sensor): Fixed abnormal display of home card 0°.
1.9.8
Sensor System IoT Hub · · h1b, h2
Features
- feature(sensor): Add support for SS1
Bug Fixes
- fix(sensor): Fix data not being reported immediately after SS1 Setup completes
- fix(sensor): Fix the problem that when reporting device status, it incorrectly reports the devices that are not in the dropped list
- fix(setup): Fix the problem of red light after Setup is completed
- fix(sensor): Fix known bugs
1.5.2
Sensor System IoT Hub · · h1b, h2
Features
- Feature (Sensor): Added "Scheduled Export" function.
- Feature (Sensor): Added BLE Sensor OTA function.
- Feature (Sensor): Optimized the content and font size of prompts.
- Feature (Sensor): Optimized homepage cards.
Bug Fixes
- Fix (Sensor): Fix Known Issues
- Fix (Sensor): Modify the temperature threshold range of temperature and humidity sensor.
- Fix (Sensor): Fixed the problem that the second step of Hub Setup guide entry is incorrectly displayed.
- Fix (Sensor): Fixed the issue that devices cannot be synchronized when the home page is refreshed.
1.5.1
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- Fix (Sensor): Fix ST8 / ST7-CL incorrect temperature display when below freezing.
1.5.0
Sensor System IoT Hub · · h1b, h2
Features
- Feature (Sensor): Addition of a temperature and humidity sensor, equipped with a probe, namely ST9.
- Feature (Sensor): Addition of an ultra-low temperature sensor, labeled as ST10.
- Feature (Settings): The functionality of independent relay control has been added to ST7-CL.
Bug Fixes
- Fix (Sensor): Fix Known Issues
1.4.9
Sensor System IoT Hub · · h1b, h2
Features
- Feature (Hub Setup): Add a guided workflow for error status code (5) in the second step failure.
- Feature (Hub Setup): Improve the issue with retrieving Hub version information in the fourth step, by proactively synchronizing server data when the "Retry" button is clicked.
- Feature (Support): Add the option for users to provide their email address when submitting feedback, with the default being their user account.
Bug Fixes
- Fix (Sensor): Fix Known Issues
1.4.8
Sensor System IoT Hub · · h1b, h2
Features
- Feature (Sensor): Added the Temperature Sensor: ST8.
- Feature (Sensor): Added the Temperature Controller: ST7-CL.
- Feature (Sensor): Added support for no water alarm mode in SW2.
Bug Fixes
- Fix (Sensor): Fix Known Issues
1.4.7
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix Known Issues
1.4.6
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix Known Issues
1.4.5
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix Known Issues
Features
- feature(Settings): Added New Hub offline notification switch in Alerts.
- feature(Settings): Added New unbinding function in Hub Settings.
- feature(Settings): Add a new style of temperature and humidity sensor data display.
- feature(Hub): Add a Hub type: H2.
1.7.9
Sensor System IoT Hub · · h1b, h2
Features
- feature(sensor): Added the function of reporting data and alarm from BLE Sensor(ST6)
Bug Fixes
- fix(sensor): Fix known bugs
1.4.3
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix Known Issues
Features
- feature(sensor): Added Climate Sensor - ST6.
- feature(Export Data): Support exporting historical data to mailbox.
1.7.5
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(Hub): Fix bugs of abnormal beeping sound from the Hub
1.4.0
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Cloud Synchronization of Device Information for Temp Sensor - ST7.
- fix(sensor): Support for Setting Hub Beep for Individual Sensors.
- fix(sensor): Fix Known Issues.
Features
- feature(sensor): Added Water Leak Sensor - SW2
- feature(sensor): Added Temp Sensor - ST5
- feature(sensor): Added Router Rebooter Sensor
1.7.1
Sensor System IoT Hub · · h1b, h2
Features
- feature(sensor): Added the function of reporting data and alarm from BLE Sensor(SW2,ST5)
Bug Fixes
- fix(sensor): Fix known bugs
1.7.0
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known bugs
1.3.0
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known issues
Features
- feature(sensor): Added new device type: Temp Sensor - ST7
- feature: Optimized the Sensor Settings interface
1.6.7
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known bugs
1.1.0
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known issues
Features
- feature(sensor): Sensor new type support ST3
- feature: Optimized situations such as slow request data
1.6.5
Sensor System IoT Hub · · h1b, h2
Features
- feature(sensor): Added ST4 sensor
- feature(sensor): Optimize delete function
- feature(sensor): Added Event fault event type
Bug Fixes
- fix(sensor): Fix known bugs
1.0.20
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known bugs
Features
- feature(sensor): Added ST4 Temperature sensor
- feature(UI): Added Hub types and cards
- feature(UI): Adjust Node default value display
- feature: Added Event fault event type
- feature: Optimized NodeInfo and Shadow repeated loading issue when first entering
1.0.19
Sensor System IoT Hub · · h1b, h2
Bug Fixes
- fix(sensor): Fix known BUG.
Features
- feature(home): Added video guide for new users
- feature(sensor): Optimized the Sensor card interface
- feature(settings): Update time zone information
- feature(settings): Adds support for more languages: French, Slovenia
1.0.18
Sensor System IoT Hub · · h1b, h2
Features
- feature(home): Optimized the Home page
- feature(suppport): Optimized Support Section
- feature(sensor): Optimized Historic Curve Graph
- feature(sensor): Supported deleting sensor
- feature(Alerts): Added Alerts Schedule
1.2.7
Sensor System IoT Hub · · h1b, h2
Features
- feature(sensor): Support adding Water Leak Sensor and Window & Door sensor
- feature(sensor): Adapted to more types of temperature and humidity sensors
- feature(alarm): Added a new Alerts control option (delay before Alerts) for Climate Sensor
Bug Fixes
- fix(sensor): Discard invalid value reported by sensor (-148’)
- fix(sensor): Unable to disalarm the beeper in some cases
1.0.17
Sensor System IoT Hub · · h1b, h2
Features
- feature(Support): Added contact us(https://mocreo.com/service) Support feature
- feature(sensor): Support adding Water Leak Sensor and Window & Door sensor
- feature(sensor): Adapted to more types of temperature and humidity sensors
- feature(version): Support latest firmware update notification
- feature(notification): Added Android push notification function
- feature(alarm): Added a new Alerts control option (delay before Alerts) for Climate Sensor
- feature(upgrade): Support upgrading the Hub firmware via App / Portal
Bug Fixes
- fix(event): Optimized the event notification
- fix(notification): Fixed the issue of no sound with IOS notification
- fix(Setup): Fixed the issue of failing to obtain geographic authorization
- fix(UI): Some other optimizations on the UI