Quick Start
Install the MOCREO Sensor App, choose the exact Hub, sensor, or controller model, then follow its addition and deployment guide.
Follow these steps in order. Add Hub-connected sensors only after the Hub is online.
1. Download and Install the App
Install the MOCREO Sensor App, create an account, verify your email address, and sign in.
App Download & Installation
Install the App, create an account, and sign in.
2. Add and Deploy the Hub
H1B Hub
Add the H1B through Ethernet or 2.4 GHz Wi-Fi, then place it for reliable coverage.
H2 Hub
Add the H2 over 2.4 GHz Wi-Fi, then choose its final outlet.
Skip this step for ST7, ST8, NM1, and ST7-CL, which do not use a MOCREO Hub.
3. Choose the Exact Device Model
Choose a Sensor or Controller
Open the model list and follow the correct Zigbee, Hub Bluetooth, local sensor, or local controller flow.
4. Verify the Deployment
At the final installation location, confirm all of the following:
- The device card appears in the App.
- The device shows online.
- The latest reading or state updates.
- Hub-connected sensors remain online after the Hub and sensor are moved apart.
- The probe or sensing surface is secured at the intended monitoring point.
MOCREO Sensor System
Use this documentation for devices managed in the MOCREO Sensor App, including H1B and H2 Hubs, compatible Hub-connected sensors, local Bluetooth devices, and NM1.
Quick Start
Install the MOCREO Sensor App, choose the exact Hub, sensor, or controller model, then follow its addition and deployment guide.