ST10
ST10's addition and installation deployment.
- Here, you can find guidance on the addition and installation deployment of ST10. Before reading the following article, please ensure that you have completed the H5-Lite setup process.
What should I prepare?
How to set it up?
Before actual deployment, we recommend prioritizing the ST10 Sensor Setup process, which involves adding the sensor via the MOCREO Smart App.
Before adding the ST10 Sensor, please ensure that you have completed the setup process for the H5-Lite deployed at the same location as the sensor.
Add ST10 Sensor
Please place your ST10 Sensor near the H5-Lite and your smartphone to ensure that during the sensor setup process, the sensor can be successfully scanned by both the H5-Lite and your smartphone's Bluetooth.
You just need to follow the prompts in the app to complete the ST10 Sensor setup process smoothly.
How to mount it?
The ST10 ultra-low temperature wireless sensor is widely utilized in medical laboratory research and industrial monitoring scenarios.
Considerations for Deploying the ST10 Sensor:
- ultra-low temperature environments：Please note that the ST10 Sensor's external temperature probe is waterproof, while the main body of the Sensor (square structure) is not waterproof.
Using a laboratory freezer as an example, tape the Sensor data logger to the outside of the freezer door and place the probe at the location inside the freezer.
Test the Effectve Distance
Place the paired ST10 Sensor in the location you want to monitor. The suggested distance between the Hub and the Sensor is 67 ft - 82 ft (Household environment).
- If you are using the MOCREO Sensor App
Press the ST10 Sensor button for 1s. Observe whether the time displayed after "Last updated" on the Sensor card in the main MOCREO client interface has been updated to the current time.
If it has been updated to the current time, you may proceed to the Sensor configuration page to check the current real signal level of the Sensor.
- If you are using the MOCREO Smart App
Press the ST10 Sensor button for 1s. Go to the H5-Lite LCD display area to view the current actual signal level of the sensor.
Path: Sensor (Apps)>>>Select a sensor >>> Confirm twice to enter the sensor configuration page.
Note: lf the current signal level of the sensor is weak, We recommend that you readjust the deployment position of the Hub or Sensor.