MOCREO Smart System
MOCREO Smart SystemGuidesH5 Hub

Manage H5 Network and Wi-Fi

Contact Support

Path: Home → Settings → Network & Internet

View Network Information

View network information · Walkthrough

Watch this walkthrough or follow the steps below.

  1. On the APPS list, rotate the knob until Settings is in the middle, then press the knob.
  2. Rotate the knob to Network & Internet, then press the knob.
  3. The page shows SSID, Wi-Fi Signal, IP, Router, and DNS Server.
  4. Rotate the knob to scroll down to MAC Addr.

Path: Home → Settings → Network & Internet

The H5 can show:

  • SSID and Wi-Fi Signal
  • IP, Router, and DNS Server
  • MAC Addr
  • Network Diagnostics

Rotate the knob to scroll to MAC Addr and Network Diagnostics. SSID and Wi-Fi signal are hidden while the H5 is using Ethernet. The Hub SN is under My Devices.

Switch to a Saved Wi-Fi Network

Switch to a saved Wi-Fi network · Walkthrough

Watch this walkthrough or follow the steps below.

  1. On the APPS list, rotate the knob until Settings is in the middle, then press the knob.
  2. Rotate the knob to Network & Internet, then press the knob.
  3. SSID shows the network in use. Press the knob to open the Wi-Fi list.
  4. The check mark shows the current network. Rotate the knob to another saved network.
  5. Press the knob to open the highlighted network.
  6. Join This Network is highlighted. Press the knob.
  7. The H5 switches networks. The check mark moves to the new network.
  8. Back on Network & Internet, SSID shows the new network.

Path: Network & Internet → SSID → Wi-Fi list → Network → Join This Network

The check mark shows the network in use. After you select Join This Network, the H5 switches to that network, marks it with the check mark, and moves it to the top of the list.

Add Another Network

Path: Network & Internet → SSID → Other Networks

Selecting Other Networks starts the H5 setup flow for a new Wi-Fi configuration.

Change or Remove a Saved Network

Open the network from the Wi-Fi list, then select:

  • Change Password — re-enters Setup so the password can be entered again.
  • Forget This Network — removes the saved configuration. The H5 requires at least one saved Wi-Fi network.

To investigate connectivity, open Network Diagnostics from Network & Internet and record any result shown on the right screen. If an error code appears, use the H5 screen error-code guide to check what the code means and follow its troubleshooting steps.

Was this page helpful?

On this page