MOCREO Smart System
MOCREO Smart SystemReferenceRelease Notes

H5 Pro Release Notes

Release notes for MOCREO H5 Pro, covering firmware, app, portal, and device update history.

v1.3.1

H5 Pro · · h5-pro

New Features

  • Network Priority: Added network priority behavior for Ethernet and Wi-Fi switching.

Improvements

  • Network Module Refactor: Refactored the network module to support plug-and-play Ethernet and Wi-Fi switching without requiring a reboot.
  • Configurable Network Priority: Added configurable network priority between Ethernet and Wi-Fi.

Bug Fixes

  • Network Connection Stability: Fixed Hub restarts during network connection.
  • BLE Command Timeout Handling: Fixed BLE command timeout handling when a Sensor does not respond.
  • Network Diagnostics: Fixed a network diagnostics freeze after router SSID changes.

v1.3.2

H5 Pro · · h5-pro

Improvements

  • Bluetooth Scanning in Crowded Environments: The Hub now processes only broadcasts from MOCREO sensors and ignores everything else, which reduces the scanning load where many other Bluetooth devices are present.
  • Automatic Recovery from Scanning Failures: If Bluetooth scanning stops responding, the Hub now restarts itself instead of staying unable to find sensors until it is unplugged. Sensor list, history, and logs are saved before the restart.

Bug Fixes

  • Wi-Fi Setup with Duplicate Network Names: Fixed cases where the Hub could join the wrong access point when several access points share the same Wi-Fi network name.
  • Leaving Setup Mode: Fixed a case where the Hub could not leave Setup mode when it was entered again after setup without restarting the Hub.
  • Setup Timeout: Fixed a case where the Hub could wait indefinitely when the target Wi-Fi network was not found during a retry scan. It now returns to normal Wi-Fi connection attempts.

Notes

  • As a side effect of the stricter broadcast filtering, a sensor name may appear incomplete or be shown as its MAC address.

v1.3.0

H5 Pro · · h5-pro

New Features

  • Hub Device Description Support: Added or updated Hub device-description support for scan_sensor and sync_properties.
  • SD1 Command Support: Added SD1 sync_properties command support.

Improvements

  • LB1 Command Reliability: Improved LB1 command reliability by addressing uplink and downlink counter synchronization issues.
  • Scan Sensor Compatibility: Improved scan_sensor compatibility when commands are sent through args.
  • SD1 Temperature Display: Improved SD1 out-of-range temperature display logic.

Bug Fixes

  • Hub Restart Stability: Fixed Hub restarts triggered by Sensor alarms, LW1 dismiss actions, MS3 offline-history transfers, and network connection scenarios.
  • Offline Data Uploads: Fixed offline data upload failures and missing cloud or TSDB data.
  • BLE Command Timeouts: Fixed BLE command timeout cases where Sensor non-response could block the system.
  • SD1 and MS3 Issues: Fixed SD1/MS3 display, battery, calibration, humidity field, and probe-disconnect issues.
  • Command Handling: Fixed command pagination and multi-command packet handling.
  • Web Portal Issues: Fixed several Web Portal validation, session, and static IP issues.

v1.2.3

H5 Pro · · h5-pro

New Features

  • Device Support: Added support for the LB1 device.
  • Alert Rules: Added support for syncing local alert rules to LS1 and LS2 Sensors.

Improvements

  • Weather App: Added a manual refresh button and a time display. Optimized the background data refresh mechanism.
  • Network Recovery: Enhanced the auto-reconnect mechanism when Wi-Fi is disconnected. Added a self-recovery feature that automatically restarts the Hub if the network connection is lost for an extended period to ensure system stability.
  • Battery Monitoring: The Hub will now immediately sync the battery status to the server if a significant drop (10% or more) is detected on paired sensors.
  • Diagnostic Mode: Improved the on-screen prompts displayed after completing a network diagnostic scan.
  • Setup Experience: Added a convenient "Return to Start" button on error screens during the setup process.
  • Firmware Update: Added a clearer error interface to indicate if an over-the-air (OTA) firmware update fails.

Bug Fixes

  • LED Indicator: Fixed an issue where the Hub's LED indicator did not update correctly after the network recovered.
  • Configuration Sync: Fixed a delay issue where LS1/LS2 Sensor configurations were not synchronized to the server in a timely manner.

v1.2.2

H5 Pro · · h5-pro

New Features

  • Device Support: Added compatibility support for LD1 and MS2 models.
  • Hybrid Mode: Introduced "Cloud + Local" hybrid mode for more flexible connection options.
  • Network Settings: Added support for static IP configuration and custom NTP server selection.

Improvements

  • Connection Stability: Optimized offline detection logic for LS1/LS2 to reduce false alarms.
  • Network Reliability: Enhanced CoAP communication stability through intelligent retry mechanisms and adaptive heartbeat intervals.

v1.2.1

H5 Pro · · h5-pro

Improvements

  • Alert Rule Optimization: Optimized the rule inheritance logic. Override and repeat rules now inherit the repeat interval from the active rule to conserve system resources.
  • Leakage Sensor Data Logic: Optimized data reporting for flood sensors. The system now filters out duplicate data and only reports when there is a change in flood levels, improving efficiency.

Bug Fixes

  • Alert Dismissal Logic: Fixed an issue with the alert dismissal process. Dismissing an alert now correctly skips hierarchical rule reporting, significantly reducing unnecessary notification noise.

v1.2.0

H5 Pro · · h5-pro

Improvements

  • Optimized the synchronization process for network information to the server.
  • Enhanced the logic for fetching and triggering alarm rules to improve reliability.
  • Improved the display of alerts within the Sensor App for better clarity.

Bug Fixes

  • Fixed an issue where the indicator light status could display incorrectly after device startup.
  • Resolved a problem that sometimes prevented repeated alerts from being cleared properly.
  • Corrected display abnormalities on the history and detail pages when LW1 device information was not available.
  • Addressed an issue causing missing network information (e.g., SSID, signal strength) in device status reports.
  • Fixed an occasional status synchronization error after remote command execution.
  • Resolved an interface issue where the alert clearance screen could disappear after device list updates.

v1.0.8

H5 Pro · · h5-pro

Improvements

  • Adjusted V3 PingLog processes to enhance performance.
  • Improved the method for extracting version numbers during updates.

Bug Fixes

  • Resolved the issue where reboot tips could not be displayed multiple times.
  • Fixed the ESC key behavior on the guide page to prevent unintended homepage prompts.

v1.0.9

H5 Pro · · h5-pro

Bug Fixes

  • Fix known issues

H5 Lite Release Notes

Release notes for MOCREO H5 Lite, covering firmware, app, portal, and device update history.

H6-Lite Release Notes

Release notes for MOCREO H6 Lite, covering firmware, app, portal, and device update history.