SW3 Deployment Guide
Use this guide after the SW3 has been added to the MOCREO Smart App and confirmed online.
Use this guide after the SW3 has been added to the MOCREO Smart App and confirmed online.
SW3 DEPLOYMENT MAP
Mount, place, and verify
01 · MOUNT
Place the SW3 flat and stable with its leak-detection contacts facing the monitored surface.
02 · PLACE
Position the Sensor at the lowest likely water-collection point near a pipe, appliance, tank, drain, or other potential leak source.
03 · VERIFY
Confirm that the SW3 remains online after placement. If safe for the monitored area, perform a small controlled water test, confirm the alert, and dry the Sensor before returning it to service.
Avoid: Covering the top, side, or bottom contacts, placing the Sensor where routine splashes would create false alarms, and blocking the wireless path to the H6 Lite Hub with metal.