MOCREO Smart System
MOCREO Smart SystemGuidesSmart App

Manage Homes, Rooms, and Users

Contact Support

Create, switch, and remove Homes or Rooms, and update Home-level settings in the MOCREO Smart App.

In the MOCREO Smart App, devices and members belong to a Home. Rooms organize devices within that Home.

Create or Manage a Home

Create and edit a Home · Walkthrough

Watch this walkthrough or follow the steps below.

  1. Open Profile, then tap Home Settings.
  2. The page lists Homes you created and joined. Tap Create Home.
  3. Enter a Home name of up to 20 characters. Cancel creates nothing.
  4. Enter Storage Home, then tap Confirm.
  5. Storage Home opens in Home Settings. As an Admin, tap Home Name to edit it; Users cannot change settings.
  6. Enter the new name and Confirm, or Cancel to keep it unchanged.
  7. The Home is created and its updated name is displayed.

Path: Profile → Home Settings

The page that opens is titled Home Management and lists the Homes you created and joined. You can also open it from Home → current Home name → Home Management.

  • To create a Home, tap Create Home, enter a name, and tap Confirm.
  • To remove a Home you created, select it on Home Management to open its Home Settings page, then tap Remove. Remove all devices from the Home first.
  • If you joined another user's Home, the same button is labeled Exit.

Switch Homes

Path: Home → current Home name → select another Home

The App reloads the Rooms, devices, and members associated with the selected Home.

Create or Manage a Room

Create and edit a Room · Walkthrough

Watch this walkthrough or follow the steps below.

  1. As an Admin, tap the layer icon beside the Room tabs.
  2. Select Room Management. This entry is hidden for User members.
  3. Tap Add Room to create a Room in this Home.
  4. Kitchen is filled in initially and its recommended name is selected. Enter Storage instead. The top-right close icon leaves without creating a Room.
  5. Storage is entered. Tap Add Room to create the Room.
  6. Select the new Room to edit it.
  7. Edit Room Name, then tap Save. Rooms organize devices; they do not change device behavior.
  8. The Room is created and its updated name is displayed.

Path: Home → layer icon beside the Room tabs → Room Management

  • To create a Room, tap Add Room, enter a name, and tap Add Room.
  • To rename or remove a Room, select it in Room Management, then edit the name or tap Remove.
  • To switch Rooms, tap the target Room in the Room tabs at the top of the Home page.

Rooms organize and filter devices but do not change device behavior.

Change the Temperature Unit

Path: Profile → Home Settings → select the Home → Temperature Unit

Select Celsius or Fahrenheit. The unit applies to every device and member in the current Home.

A temperature or humidity Sensor may also show Temperature Unit under General Settings on its Sensor Settings page. After you confirm the prompt, this entry opens Home Management; select the Home there to change the unit.

Set the Home Region

Path: Profile → Home Settings → select the Home → Region

Select the country and region, then tap Save. Region controls the weather location shown for the Home; it is separate from Time Zone.

Member Permissions

  • Admin: Can manage devices, Home settings, and member access.
  • User: Can view data but cannot change devices or Home settings.

To add a member, see How to Share Devices with Others.

Was this page helpful?

On this page