View Live Data and History
Contact SupportView live readings and history, or compare temperature and humidity from up to three Sensor or probe data sources.
Open a Device
Path: Home → Device card
The App opens the matching detail view for a Hub, a standard sensor, or a multi-probe sensor.
Using Bluetooth LE Sensors without a Hub
ST5, ST6, ST8, ST9, ST10, MS1, MS2, MS3, and SD1 can be used in the MOCREO Smart App without a Hub. When your phone is near the Sensor, the App reads the Sensor's Bluetooth broadcast and shows the live reading on the Home device card.
The device detail page does not use this broadcast. Its reading, chart, and history come from data that a Hub uploads, so without a Hub the detail page shows -- and no chart. Add a Hub to unlock the detail page, history, and remote access.
Change the Chart Range
On the device detail page, select 1H, 1D, 1W, 1M, or 1Y above the chart.
- Use a short range to inspect recent changes.
- Use 1M or 1Y to identify longer trends.
- Check the latest reading time before treating a chart as current.
Open Detailed History
Path: Device detail → View History Details / More Data
The button is View History Details below the chart on temperature and humidity detail pages and More Data on water-leak, water-level, and door-sensor timeline pages.
Compare Multiple Sensors
Path: Home → Sensor card → Multi-Device Data Comparison
The page that opens is titled Data Comparison.
The button is at the bottom of the Sensor detail page and also appears on NS3 and SD1 probe chart cards. The current Sensor or probe is selected automatically. Tap Add Source and select another source to add it immediately; use × on a source chip to remove it. Select Start Time or End Time to change a date—the charts refresh automatically.
- Compare up to three data sources from the current Home. Hubs are excluded.
- Sources must provide temperature or humidity and share at least one measurement with the selected sources. Availability is based on measurements, not a model list.
- NS3 and SD1 probes appear as separate sources; the SD1 door contact is excluded.
- The default range is the latest month, with up to one year of history. Temperature and humidity use separate charts; each source chip's name and color identify its curve, and colors may be reassigned after a source is removed.