MOCREO Smart System
MOCREO Smart SystemGuidesSmart App

Export Data and Create a Schedule

Contact Support

Path: Home → Device card → Settings (⚙) → History Data Export

Open Data Export

Path: Home → Device card → Settings (⚙) → History Data Export

The page that opens is titled Data Export.

Send a One-Time Export

Export history data by email · Walkthrough

Watch this walkthrough or follow the steps below.

  1. Select ST6 Demo on the Home screen.
  2. Open the settings icon in the top-right corner.
  3. With a connected Hub and a non-user role, open History Data Export.
  4. Set the start of the export period.
  5. Select October 19, 2026 at 00:00 as the start time.
  6. Tap Done to close the start-time picker.
  7. Open End Time to set the end of the period.
  8. Select October 26, 2026 at 00:00 as the end time.
  9. Tap Done to close the end-time picker.
  10. Confirm [email protected] under Receive Mail.
  11. Check the period and email address, then tap Export.
  12. Wait while the export is generated.
  13. Check your inbox for the exported data.
  1. Set Start Time and End Time.
  2. Confirm the address under Receive Mail.
  3. Tap Export.

The App submits the export to the email address shown on the page.

Create a Recurring Export

Create a weekly export schedule · Walkthrough

Watch this walkthrough or follow the steps below.

  1. Select ST6 Demo on the Home screen.
  2. Open the settings icon in the top-right corner.
  3. With a connected Hub and a non-user role, open History Data Export.
  4. Tap Scheduled Export to create a recurring export.
  5. Confirm [email protected] as the recipient.
  6. Open Export Time to choose when the email is sent.
  7. Use the datetime time wheels to select 09:00, then dismiss the picker.
  8. Under Frequency, select Every week.
  9. The weekday wheel opens with Monday selected by default.
  10. Slide from Monday to Tuesday to change the pending weekday.
  11. Slide back from Tuesday to Monday for this schedule.
  12. Tap Done to confirm Monday.
  13. Aggregated Data is on by default, with 1 hr selected.
  14. Turn Aggregated Data off to hide the interval options.
  15. Turn it back on and keep the supported 1 hr interval.
  16. Tap Save to enable the export schedule.
  17. Wait while the schedule is saved. Save is temporarily unavailable.
  18. Back on Data Export, review the enabled schedule and weekly summary.

Path: Data Export → Scheduled Export

  1. On the Data Export page, tap Scheduled Export. If a schedule already exists, turn on the Scheduled Export toggle, then tap the schedule summary row below it.
  2. Confirm Receive Mail.
  3. Select Export Time.
  4. Select the available Frequency: every day, week, or month.
  5. Choose Aggregated Data when the selected device supports it.
  6. Tap Save.

For date-range and delivery considerations, see Data Export Considerations.

Was this page helpful?

On this page