ST6 App Addition and Deployment Guide
Add the ST6 Bluetooth temperature and humidity sensor through an H1B or H2 Hub, then install and verify it.
Before You Start
- Charge the ST6 and confirm that an H1B or H2 Hub is online.
- Enable Bluetooth on the phone and keep the phone, ST6, and Hub close together.
Add ST6 in the App
- In the MOCREO Sensor App, tap + and select Climate Sensor - ST6.
- Select the online H1B or H2 Hub.
- Wait for the App to scan for nearby sensors, select the ST6, and complete the addition.
- Confirm that the ST6 card reports current temperature and humidity readings.
Install and Verify ST6
- Place the ST6 where air can circulate around it.
- Avoid direct sunlight, heating or cooling vents, condensation, and direct contact with hot or cold surfaces.
- Confirm fresh readings at the final location, then configure temperature and humidity alerts.
For the complete product instructions, see the ST6 User Guide.