ST9 App Addition and Deployment Guide
Add the ST9 Bluetooth climate sensor through an H1B or H2 Hub, then install its external probe.
Before You Start
- Power the ST9 and confirm that an H1B or H2 Hub is online.
- Enable Bluetooth on the phone and keep the phone, ST9, and Hub close together.
Add ST9 in the App
- In the MOCREO Sensor App, tap + and select Climate Sensor - ST9.
- Select the online H1B or H2 Hub.
- Wait for the App to scan for nearby sensors, select the ST9, and complete the addition.
- Confirm that the ST9 card reports current temperature and humidity readings.
Install and Verify ST9
- Secure the external probe in the monitored environment and keep the ST9 body dry and accessible.
- Route the probe cable without sharp bends, tension, or pinching in a door seal.
- Confirm fresh readings at the final location, then configure temperature and humidity alerts.
For the complete product instructions, see the ST9 User Guide.