NS3 App Addition Guide

Before You Start

NS3 main unit, supplied probes, splitter, and USB-C power cable
A 5 V power adapter, which is not included
An available Wi-Fi network
A signed-in MOCREO account
A phone with the MOCREO Smart App installed and Bluetooth enabled

The NS3 connects directly to Wi-Fi and does not require a MOCREO Hub.

Add NS3 in the MOCREO Smart App

Connect the probes and splitter to the NS3.
Connect the NS3 to power and wait for its screen to turn on.
Press and hold its button for 5–10 seconds to enter Setup mode.
Sign in to the MOCREO Smart App, tap +, and select NS3.
Follow the in-app Wi-Fi instructions.
After setup, complete Setting up the room, Set name, and Set Up Probes for each connected probe.

Confirm the Device Was Added

Confirm that the NS3 appears in the App, shows as online, and reports both probe channels.

Use Without a Network (Offline Mode)

If you prefer not to connect the NS3 to the internet, you can use it without the App. Press and hold its button for 5–10 seconds to enter or exit Setup mode as needed.

In offline mode, the NS3 cannot be monitored remotely or use online alert features. To switch to network use, follow Add NS3 in the MOCREO Smart App.

For probe and main-unit placement, see the NS3 Deployment Guide.