SW2 App Addition Guide
Keep the SW2, Hub, and phone close together during setup.
Before You Start
- SW2 sensor and supplied charging cable
- A compatible Smart System Hub already online in the App
- A signed-in MOCREO account
- A phone with the MOCREO Smart App installed and Bluetooth enabled
Keep the SW2, Hub, and phone close together during setup.
Add SW2 in the MOCREO Smart App
-
Press the SW2 Setup pinhole for 1 second.
-
Sign in to the MOCREO Smart App and confirm the Hub is online.
-
On Home, tap + to open Add Devices. Select SW2 under Water Leak Sensor to start Bluetooth discovery.
-
Keep the App open until the addition finishes.
Complete the addition before the blue status light stops flashing. If discovery times out, press the Setup pinhole for 1 second and try again.
Confirm the Device Was Added
Confirm that the SW2 appears in the App, shows as online, and reports a current update time.
For probe placement, see the SW2 Deployment Guide.