Web Portal Configuration Guide¶

1. Hybrid Mode Settings¶

1.1 Access Configuration Page¶

Open browser and navigate to: http://<hub ip>/
Select Hub Operation Mode
Select Hybrid Mode

1.2 MQTT Configuration¶

Configuration Item	Type	Default	Description
Server Address	Required	-	MQTT server address
Port	Required	1883	MQTT port number
Username	Optional	-	MQTT username
Password	Optional	-	MQTT password

Note: If your MQTT broker or platform requires a Client ID, use the Hub SN.
The Hub uses its SN as the MQTT Client ID automatically, so there is no separate Client ID field on the Hub configuration page.

1.3 NTP Configuration¶

Configuration Item	Type	Description
Use Custom Source	Toggle	Whether to use custom NTP source
Server Address	Optional	Custom NTP server address [Multiple addresses separated by `;`]

2. Static IP Settings¶

2.1 Access Configuration Page¶

Open browser and navigate to: http://<hub ip>/
Select Static IP Settings

2.2 Configuration Options¶

Configuration Item	Type	Description
Enable Static IP	Toggle	Whether to enable static IP configuration
IP Address	Required	Static IP address
Subnet Mask	Required	Subnet mask
Router	Required	Gateway address
DNS Server	Required	DNS server address

Important Notes¶

Static IP configuration requires ensuring the IP address is unique within the local network
MQTT configuration requires ensuring the server address and port are correct
If your MQTT broker requires a Client ID, use the Hub SN